Standard Replacements and Supplement Items

No.

Product

Description

Image

093/094

Potential Mesh (with 1 mm hexagons)

for DET40/75 (transmission > 80%)

Description Sheet

091/092

Potential Mesh
(with 4 mm squares)

(transmission > 94%)

Description Sheet

095/096

Wowen potential Mesh (with 140 micron open cell)

for DLD40 (transmission > 75%)
for DLD80/HEX75 (transmission > 75%)

Description Sheet

099

for DLD120/HEX100/120 (transmission > 75%)

097

Calibration Masks

for DLD40/DLD80 or HEX75

Description Sheet

098

Shim 40/80/120

Intermediate contact spacer for MCP stacks

323

BA3

battery box for delay-line detectors. Provides floating 36 V potential difference (saves one power supply channel).

325

HVZ

passive DC adjustment box, for delay-line anode and MCP rear bias settings, up to 4 kV.

HVZ-T

passive DC adjustment box, for TOF anode and both MCP bias settings (DET only).

259

PCI2PCIe

adapter crate for TDC8HP to PCIe bus or laptop card for up to 3 TDC8HP units.

361

HFSD/HFST

HF-signal decoupler/terminator. Detector side MHV (optional SHV), rated to 4 kV, high voltage input SHV, HF-signal output to lemo00 socket / terminated by 0-200 Ω.

Description Sheet

362

ST50

50 Ohm signal terminator

363

pInv&Att

Signal inverter and/or attenuator for fast and short signals, bandwidth 1-300 MHz, 50 Ohm coax lemo00 in- and output.

Description Sheet

364

SP1

in-line spark protector, lemo00 in-/output.

148

VL1

active protection amplifier to delimit excessive signal height for subsequent circuits.

Description Sheet

365

SHV-T

SHV-T-connector for supplying two SHV-inputs from one bias output / MHV-T

366

SHV-G

SHV ground plug for setting detector potential to 0V bias (“ground”) / MHV-G

190

SHV-SHV cable

for detector bias, 1 or 4 m, length (to be defined, default: 4 m)

Cable sets (“lemo”)

for connections FT12(16)TP – ATR19 and ATR19 – TDC8HP/TDC8HQ

191

Single lemo cable (4 m, 2 m = 10 ns, 1 m = 5 ns, 4 ns, 3 ns, 2 ns, 1 ns)

194

Set of 5 cables (4 m, different colors)

195

Set of 8 cables (2 m or 4 m, different colors)

196

Set of 4×1 m, 4×2 m and 2×4 m

197

Lemo Set for CFD1c(x)/4c/8c/7x

1 ns, 2 ns, I-connector (2x), 4(6)x4 ns, 4(6) x 5 (or 10) ns

198

Lemo starker kit

misc. connectors/adapters/cables (12 pieces total)

199

Lemo starker kit plus

Lemo starter kit with additional misc. BNC connectors (20 pieces total)